{"id":1406,"date":"2026-05-07T03:47:11","date_gmt":"2026-05-07T03:47:11","guid":{"rendered":"https:\/\/aiper.com\/blogs\/?page_id=1406"},"modified":"2026-10-21T09:17:47","modified_gmt":"2026-10-21T09:17:47","slug":"pool-alkalinity-calculator","status":"publish","type":"page","link":"https:\/\/aiper.com\/blogs\/pool-alkalinity-calculator\/","title":{"rendered":"Pool Alkalinity Calculator"},"content":{"rendered":"\n<div id=\"pool-alkalinity-pro-calc\">\n    <div class=\"calc-header\">\n        <div class=\"pool-type-tabs\">\n            <button class=\"tab-btn active\" onclick=\"setPoolType('above-ground', this)\">Above-Ground<\/button>\n            <button class=\"tab-btn\" onclick=\"setPoolType('in-ground', this)\">In-Ground<\/button>\n        <\/div>\n    <\/div>\n\n    <!-- Unit Toggle -->\n    <div class=\"unit-toggle\">\n        <button id=\"unit-gal\" class=\"unit-btn active\" onclick=\"setUnit('gal')\">Gallons (US)<\/button>\n        <button id=\"unit-lit\" class=\"unit-btn\" onclick=\"setUnit('lit')\">Liters<\/button>\n    <\/div>\n\n    <div class=\"calc-grid\">\n        <!-- Input Section -->\n        <div class=\"input-section\">\n            <div class=\"input-group\">\n                <label id=\"vol-label\">Pool Volume (Gallons)<\/label>\n                <input type=\"number\" id=\"pool-volume\" value=\"10000\" inputmode=\"decimal\">\n            <\/div>\n\n            <div class=\"input-group\">\n                <label>Current Alkalinity (ppm)<\/label>\n                <input type=\"number\" id=\"current-ta\" placeholder=\"e.g. 70\" inputmode=\"decimal\">\n            <\/div>\n\n            <div class=\"input-group\">\n                <label>Target Alkalinity (ppm)<\/label>\n                <input type=\"number\" id=\"target-ta\" value=\"100\" inputmode=\"decimal\">\n            <\/div>\n\n            <div class=\"input-group\">\n                <label>Preferred Chemical<\/label>\n                <select id=\"chem-type\">\n                    <option value=\"baking-soda\">Baking Soda (Sodium Bicarb)<\/option>\n                    <option value=\"soda-ash\">Soda Ash (Raises pH more)<\/option>\n                    <option value=\"muriatic-acid\">Muriatic Acid (To Lower)<\/option>\n                    <option value=\"dry-acid\">Dry Acid (Sodium Bisulfate)<\/option>\n                <\/select>\n            <\/div>\n\n            <button onclick=\"calculateDosage()\" id=\"calc-trigger\">Calculate Dosage<\/button>\n        <\/div>\n\n        <!-- Results Section -->\n        <div class=\"results-section\" id=\"res-display\">\n            <div class=\"placeholder-msg\">Set your parameters and click calculate.<\/div>\n        <\/div>\n    <\/div>\n<\/div>\n\n<style>\n    \/* \u5b9a\u4e49\u4e3b\u9898\u8272\u53d8\u91cf\u65b9\u4fbf\u540e\u7eed\u4fee\u6539 *\/\n    :root {\n        --primary-color: #1ecad3;\n        --primary-dark: #19b2ba;\n    }\n\n    #pool-alkalinity-pro-calc {\n        max-width: 800px; \n        margin: 10px auto; \n        background: #fff;\n        border-radius: 12px; \n        border: 1px solid #eee; \n        box-shadow: 0 10px 25px rgba(0,0,0,0.08);\n        overflow: hidden; \n        font-family: -apple-system, BlinkMacSystemFont, \"Segoe UI\", Roboto, sans-serif;\n    }\n    \n    .calc-header { background: var(--primary-color); color: white; padding: 15px; text-align: center; }\n    \n    \/* Pool Type Tabs *\/\n    .pool-type-tabs { display: flex; justify-content: center; gap: 8px; }\n    .tab-btn { \n        flex: 1;\n        max-width: 150px;\n        padding: 10px 5px; \n        border: 1px solid rgba(255,255,255,0.4); \n        background: transparent;\n        color: white; \n        border-radius: 8px; \n        cursor: pointer; \n        transition: 0.3s;\n        font-size: 14px;\n    }\n    .tab-btn.active { background: white; color: var(--primary-color); border-color: white; font-weight: bold; }\n\n    \/* Unit Toggle *\/\n    .unit-toggle { display: flex; background: #f8f9fa; padding: 4px; border-bottom: 1px solid #eee; }\n    .unit-btn { flex: 1; border: none; padding: 12px; cursor: pointer; background: transparent; font-size: 14px; border-radius: 6px; color: #666; }\n    .unit-btn.active { background: #fff; box-shadow: 0 2px 5px rgba(0,0,0,0.1); font-weight: bold; color: var(--primary-color); }\n\n    .calc-grid { display: grid; grid-template-columns: 1fr 1fr; }\n\n    .input-section { padding: 20px; border-right: 1px solid #eee; }\n    .input-group { margin-bottom: 15px; }\n    .input-group label { display: block; font-size: 13px; font-weight: 600; margin-bottom: 6px; color: #444; }\n    .input-group input, .input-group select { \n        width: 100%; \n        padding: 12px; \n        border: 1px solid #ddd; \n        border-radius: 8px; \n        box-sizing: border-box; \n        font-size: 16px; \n        background-color: #fff;\n        outline: none;\n        transition: border-color 0.3s;\n    }\n    .input-group input:focus { border-color: var(--primary-color); }\n\n    #calc-trigger { \n        width: 100%; \n        padding: 16px; \n        background: var(--primary-color); \n        color: white; \n        border: none;\n        border-radius: 8px; \n        font-weight: bold; \n        cursor: pointer; \n        font-size: 18px;\n        margin-top: 10px;\n        -webkit-appearance: none;\n        transition: background 0.3s;\n    }\n    #calc-trigger:hover { background: var(--primary-dark); }\n    #calc-trigger:active { transform: scale(0.98); }\n\n    .results-section { \n        padding: 20px; \n        background: #fafafa; \n        display: flex; \n        flex-direction: column;\n        align-items: center; \n        justify-content: flex-start; \n        text-align: center; \n        min-height: 200px;\n    }\n    \n    .res-card { width: 100%; animation: fadeIn 0.4s ease-out; }\n    @keyframes fadeIn { from { opacity: 0; transform: translateY(10px); } to { opacity: 1; transform: translateY(0); } }\n\n    .res-val { font-size: 48px; font-weight: 800; color: var(--primary-color); margin: 5px 0; line-height: 1.2; }\n    .res-label { font-size: 12px; color: #888; font-weight: bold; text-transform: uppercase; letter-spacing: 1px; }\n    .placeholder-msg { color: #aaa; font-style: italic; margin-top: 40px; }\n\n    @media (max-width: 650px) { \n        .calc-grid { grid-template-columns: 1fr; } \n        .input-section { border-right: none; border-bottom: 1px solid #eee; padding: 20px; }\n        .results-section { padding: 30px 20px; min-height: auto; }\n        #pool-alkalinity-pro-calc { margin: 0; border-radius: 0; border: none; }\n    }\n<\/style>\n\n<script>\n    let currentUnit = 'gal';\n    let poolType = 'above-ground';\n\n    function setPoolType(type, btn) {\n        poolType = type;\n        document.querySelectorAll('.tab-btn').forEach(b => b.classList.remove('active'));\n        btn.classList.add('active');\n    }\n\n    function setUnit(unit) {\n        currentUnit = unit;\n        document.querySelectorAll('.unit-btn').forEach(b => b.classList.remove('active'));\n        document.getElementById('unit-' + unit).classList.add('active');\n        document.getElementById('vol-label').innerText = unit === 'gal' ? 'Pool Volume (Gallons)' : 'Pool Volume (Liters)';\n    }\n\n    function calculateDosage() {\n        let vol = parseFloat(document.getElementById('pool-volume').value);\n        const current = parseFloat(document.getElementById('current-ta').value);\n        const target = parseFloat(document.getElementById('target-ta').value);\n        const chem = document.getElementById('chem-type').value;\n        const resDiv = document.getElementById('res-display');\n\n        if (isNaN(vol) || isNaN(current) || isNaN(target)) {\n            resDiv.innerHTML = `<div style=\"color:#d9534f; padding:20px;\">Please fill all fields.<\/div>`;\n            return;\n        }\n\n        let mathVol = currentUnit === 'lit' ? vol * 0.264172 : vol;\n        let diff = target - current;\n        let resultTxt = \"\";\n\n        if (Math.abs(diff) < 2) {\n            resultTxt = `<div class=\"res-card\"><div class=\"res-label\">Status<\/div><div class=\"res-val\" style=\"font-size:32px\">Balanced<\/div><p>Current alkalinity is ideal.<\/p><\/div>`;\n        } else if (diff > 0) {\n            let amount, unit;\n            if (chem === 'baking-soda') {\n                amount = (diff \/ 10) * (mathVol \/ 10000) * 1.5;\n                unit = \"lbs\";\n            } else if (chem === 'soda-ash') {\n                amount = (diff \/ 10) * (mathVol \/ 10000) * 0.9;\n                unit = \"lbs\";\n            } else {\n                resDiv.innerHTML = `<div style=\"color:#d9534f; padding:20px;\">Please select chemical to RAISE.<\/div>`;\n                return;\n            }\n            resultTxt = formatResult(amount, unit, chem);\n        } else {\n            let amount, unit;\n            let absDiff = Math.abs(diff);\n            if (chem === 'muriatic-acid') {\n                amount = (absDiff \/ 10) * (mathVol \/ 10000) * 25.6;\n                unit = \"fl oz\";\n            } else if (chem === 'dry-acid') {\n                amount = (absDiff \/ 10) * (mathVol \/ 10000) * 2.1;\n                unit = \"lbs\";\n            } else {\n                resDiv.innerHTML = `<div style=\"color:#d9534f; padding:20px;\">Please select chemical to LOWER.<\/div>`;\n                return;\n            }\n            resultTxt = formatResult(amount, unit, chem);\n        }\n\n        resDiv.innerHTML = resultTxt;\n        if(window.innerWidth < 650) {\n            resDiv.scrollIntoView({ behavior: 'smooth', block: 'nearest' });\n        }\n    }\n\n    function formatResult(amt, unit, name) {\n        let displayAmt = amt.toFixed(2);\n        let chemName = name.replace('-', ' ').toUpperCase();\n        return `<div class=\"res-card\">\n            <div class=\"res-label\">Recommended Dosage<\/div>\n            <div class=\"res-val\">${displayAmt} <span style=\"font-size:20px; vertical-align:middle;\">${unit}<\/span><\/div>\n            <p style=\"margin:10px 0;\">of <strong>${chemName}<\/strong><\/p>\n            <div style=\"display:inline-block; padding:4px 12px; background:#f0f0f0; border-radius:12px; font-size:11px; color:#666;\">\n                Calculated for ${poolType.replace('-', ' ')} pool\n            <\/div>\n        <\/div>`;\n    }\n<\/script>\n\n\n\n<h2 class=\"wp-block-heading\">How to Calculate and Adjust Pool Alkalinity<\/h2>\n\n\n\n<div class=\"schema-how-to wp-block-yoast-how-to-block\"><p class=\"schema-how-to-description\">Total Alkalinity (TA) acts as a &#8220;buffer&#8221; for your pool&#8217;s pH level. If your TA is too low, your pH will bounce around erratically; if it\u2019s too high, your pH will be &#8220;locked&#8221; and difficult to adjust. Follow these steps to get your water chemistry perfect.<\/p> <ol class=\"schema-how-to-steps\"><li class=\"schema-how-to-step\" id=\"how-to-step-1778124756152\"><strong class=\"schema-how-to-step-name\">Test the Water<\/strong> <p class=\"schema-how-to-step-text\">Before using the <a href=\"https:\/\/aiper.com\/blogs\/pool-loan-calculator\/\">calculator<\/a>, you need an accurate reading of your current levels. Use a high-quality liquid drop test kit or professional-grade test strips to measure the concentration of alkaline substances in the water. The <strong>Ideal Range<\/strong> for most swimming pools is between <strong>80 and 120 ppm<\/strong> (parts per million). If you use a salt chlorine generator or have a vinyl liner, you may want to aim for the lower end of that range, around 80\u201390 ppm, to prevent scale buildup.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1778125009425\"><strong class=\"schema-how-to-step-name\">Determine Your Pool Volume<\/strong> <p class=\"schema-how-to-step-text\">Chemical dosages are calculated based entirely on the total amount of water in your system. For a rectangular pool, you can find the volume by multiplying Length \u00d7 Width \u00d7 Average Depth \u00d7 7.5 to get the total gallons. Circular pools require a different formula, specifically Diameter \u00d7 Diameter \u00d7 Average Depth \u00d7 5.9. If you are maintaining an above-ground pool, the volume is often printed on the manufacturer&#8217;s documentation or the liner&#8217;s safety label.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1778125019870\"><strong class=\"schema-how-to-step-name\">Calculate the Dosage<\/strong> <p class=\"schema-how-to-step-text\">Once you have your volume and current reading, input them into the calculator along with your target level, which is typically 100 ppm. If you need to raise the alkalinity, you will most likely use <strong>Sodium Bicarbonate<\/strong>, commonly known as baking soda. If your levels are too high and you need to lower them, the calculator will recommend <strong>Muriatic Acid<\/strong> or <strong>Sodium Bisulfate<\/strong>, also known as dry acid. Ensure you select the correct chemical type to get the most accurate weight or volume measurement.<\/p> <\/li><li class=\"schema-how-to-step\" id=\"how-to-step-1778125029652\"><strong class=\"schema-how-to-step-name\">Application and Re-testing<\/strong> <p class=\"schema-how-to-step-text\">The method you use to add chemicals is just as important as the quantity. When adding baking soda to raise levels, broadcast the powder across the surface of the pool, starting in the deep end to allow for even distribution. For lowering alkalinity with muriatic acid, keep the pump running and pour the liquid slowly into the deepest part of the pool, ensuring it stays away from the walls and plastic equipment. Always let the water circulate for at least <strong>4 to 6 hours<\/strong> before re-testing to ensure the chemicals have fully integrated with the pool water.<\/p> <\/li><\/ol><\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Pool Alkalinity Calculator FAQs<\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1778125061127\"><strong class=\"schema-faq-question\">Do I adjust pH or alkalinity first?<\/strong> <p class=\"schema-faq-answer\">You should almost always adjust <strong>Total Alkalinity first<\/strong>. Because alkalinity acts as a buffer for pH, changing your pH while alkalinity is out of balance is like trying to paint a moving target. Once your alkalinity is stabilized within the 80\u2013120 ppm range, you will find that your pH naturally settles or becomes much easier to adjust with smaller amounts of chemicals.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1778125414643\"><strong class=\"schema-faq-question\">How much alkalinity should I put in my pool?<\/strong> <p class=\"schema-faq-answer\">The amount depends entirely on your current test reading and your pool&#8217;s total volume. As a general rule of thumb for raising levels, it takes approximately <strong>1.5 lbs of Sodium Bicarbonate<\/strong> to raise the alkalinity of 10,000 gallons of water by 10 ppm. To avoid &#8220;over-shooting&#8221; your target, it is widely recommended to add only half of the calculated dose at a time, allowing the water to circulate before testing again.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1778125424778\"><strong class=\"schema-faq-question\">Does shocking a pool lower alkalinity?<\/strong> <p class=\"schema-faq-answer\">The impact of shocking depends on the type of shock used. <strong>Non-chlorine shock<\/strong> (Potassium Monopersulfate) is acidic and will gradually lower your alkalinity over time. On the other hand, common chlorine shocks like <strong>Calcium Hypochlorite<\/strong> (Cal-Hypo) have a high pH and are more likely to slightly increase alkalinity or keep it neutral. If you notice a drop in alkalinity after shocking, it is often due to the acidic nature of the contaminants being oxidized rather than the shock itself.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1778125435428\"><strong class=\"schema-faq-question\">Is 70 ppm of alkalinity okay to swim in a pool?<\/strong> <p class=\"schema-faq-answer\">Yes, it is generally safe to swim at 70 ppm, but it is not ideal for the long-term health of your pool. While 70 ppm won&#8217;t harm your skin or eyes directly, it is just below the recommended minimum of 80 ppm. At this level, your pH is at risk of &#8220;crashing&#8221; (dropping suddenly), which can make the water acidic enough to corrode metal ladders, light fixtures, and heat exchangers. You should use the calculator to bring that level back up to at least 90 ppm as soon as possible to protect your equipment.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1778125448944\"><strong class=\"schema-faq-question\">What is the difference between Total Alkalinity and pH?<\/strong> <p class=\"schema-faq-answer\">While they are closely related, they serve different purposes. pH measures how acidic or basic your water is on a scale of 0 to 14, while Total Alkalinity measures the water&#8217;s ability to resist changes in pH. Think of pH as the &#8220;driver&#8221; of the car and Alkalinity as the &#8220;guardrail&#8221; that keeps the driver from veering off the road. Without proper alkalinity, your pH will fluctuate wildly with every rainstorm or addition of chlorine.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1778125459601\"><strong class=\"schema-faq-question\">Can I use regular grocery store baking soda to raise alkalinity?<\/strong> <p class=\"schema-faq-answer\">Yes, you can. The &#8220;Sodium Bicarbonate&#8221; sold in pool stores is chemically identical to the baking soda used for baking. The only difference is usually the packaging and the price per pound. If you are managing a large pool, buying in bulk from a pool supply warehouse is often more cost-effective, but for quick adjustments, a few boxes from the grocery store will work perfectly with this calculator.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1778125474374\"><strong class=\"schema-faq-question\">Why did my alkalinity go up after adding chlorine?<\/strong> <p class=\"schema-faq-answer\">Certain types of chlorine, such as Liquid Bleach (Sodium Hypochlorite) or Cal-Hypo, have a high pH and can slightly nudge your alkalinity upward over time. Additionally, if you use a salt-water generator, the process of electrolysis can cause a gradual rise in pH and sometimes affect your overall balance. It is important to check your levels weekly during the peak swimming season.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1778125484897\"><strong class=\"schema-faq-question\">What happens if I swim in a pool with high alkalinity?<\/strong> <p class=\"schema-faq-answer\">Swimming in a pool with high alkalinity is generally not dangerous to your health, but it can be uncomfortable. High levels often lead to &#8220;pH lock,&#8221; which causes the water to become cloudy and can lead to calcium scaling on pool surfaces and equipment. It can also cause skin and eye irritation because the water is no longer in a neutral, skin-friendly state.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1778125494966\"><strong class=\"schema-faq-question\">Why is my alkalinity low after a heavy rain?<\/strong> <p class=\"schema-faq-answer\">Rainwater is naturally acidic, often having a pH of around 5.0 to 5.5. When a significant amount of rain enters your pool, it effectively &#8220;dilutes&#8221; your alkaline buffers. If you experience a heavy downpour, it is best to wait for the rain to stop, let the pump circulate the water for a few hours, and then run a new test before adding chemicals.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1778125506986\"><strong class=\"schema-faq-question\">How long should I wait to swim after adding chemicals?<\/strong> <p class=\"schema-faq-answer\">As a general rule, you should wait at least <strong>45 minutes to an hour<\/strong> after adding baking soda before swimming, provided the pump is running. However, if you have added muriatic acid to lower your alkalinity, you should wait at least <strong>4 hours<\/strong> or until a full turnover of the pool water has occurred. Acid needs time to disperse completely to avoid &#8220;hot spots&#8221; that could cause chemical burns.<\/p> <\/div> <\/div>\n\n\n<!-- aiper-tool-links -->\n<div class=\"aiper-tool-links\">\n  <div class=\"aiper-tl-section\">\n    <div class=\"aiper-tl-heading\">More Tools<\/div>\n    <div class=\"aiper-tl-tags\">\n      <a href=\"https:\/\/aiper.com\/blogs\/pool-fill-time-calculator\/\" class=\"aiper-tl-tag\">Pool Fill Time Calculator<\/a>\n<a href=\"https:\/\/aiper.com\/blogs\/pool-turnover-rate-calculator\/\" class=\"aiper-tl-tag\">Pool Turnover Rate Calculator<\/a>\n<a href=\"https:\/\/aiper.com\/blogs\/pool-saturation-index-calculator\/\" class=\"aiper-tl-tag\">Pool Saturation Index Calculator<\/a>\n    <\/div>\n  <\/div>\n  <div class=\"aiper-tl-section\">\n    <div class=\"aiper-tl-heading\">Related Articles<\/div>\n    <div class=\"aiper-tl-tags\">\n      <a href=\"https:\/\/aiper.com\/blogs\/how-to-lower-alkalinity-in-pool\/\" class=\"aiper-tl-tag\">How to Lower Alkalinity in a Pool (and When You Actually Need To)<\/a>\n<a href=\"https:\/\/aiper.com\/blogs\/how-to-raise-alkalinity-in-pool\/\" class=\"aiper-tl-tag\">How to Raise Alkalinity in a Pool Using Baking Soda<\/a>\n<a href=\"https:\/\/aiper.com\/blogs\/pool-alkalinity-vs-ph\/\" class=\"aiper-tl-tag\">Pool Alkalinity vs pH: How They Interact and Which to Fix First<\/a>\n<a href=\"https:\/\/aiper.com\/blogs\/how-to-balance-alkalinity-in-pool\/\" class=\"aiper-tl-tag\">Total Alkalinity Explained: Why It\u2019s Your Pool Chemistry\u2019s Shock Absorber<\/a>\n    <\/div>\n  <\/div>\n<\/div>\n\n<style>\n.aiper-tool-links{margin:2.5rem 0 1.5rem;padding:1.5rem 1.75rem;background:linear-gradient(135deg,rgba(148,134,247,.04),rgba(30,202,211,.04));border-radius:12px;border:1px solid rgba(148,134,247,.10)}\n.aiper-tl-section{margin-bottom:1.25rem}\n.aiper-tl-section:last-child{margin-bottom:0}\n.aiper-tl-heading{font-size:.75rem;font-weight:600;letter-spacing:.09em;text-transform:uppercase;color:#8899aa;margin:0 0 .65rem}\n.aiper-tl-tags{display:flex;flex-wrap:wrap;gap:.5rem}\n.aiper-tl-tag{display:inline-block;padding:.4rem .95rem;font-size:.82rem;font-weight:500;line-height:1.35;color:#9486f7;background:rgba(148,134,247,.055);border:1px solid rgba(30,202,211,.25);border-radius:22px;text-decoration:none;transition:all .18s}\n.aiper-tl-tag:hover{background:#1ecad3;color:#fff;border-color:#1ecad3;box-shadow:0 2px 10px rgba(30,202,211,.22)}\n<\/style>","protected":false},"excerpt":{"rendered":"<p>Above-Ground In-Ground Gallons (US) Liters Pool Volume (Gallons) Current Alkalinity (ppm) Target Alkalinity (ppm) Preferred Chemical Baking Soda (Sodium Bicarb)Soda Ash (Raises pH more)Muriatic Acid (To Lower)Dry Acid (Sodium Bisulfate) Calculate Dosage Set your parameters and click calculate. How to Calculate and Adjust Pool Alkalinity Pool Alkalinity Calculator FAQs More Tools Pool Fill Time Calculator&#8230;<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"class_list":["post-1406","page","type-page","status-publish","hentry"],"lang":"en","translations":{"en":1406,"es":1794,"de":1729,"fr":1733},"_links":{"self":[{"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/pages\/1406","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/comments?post=1406"}],"version-history":[{"count":6,"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/pages\/1406\/revisions"}],"predecessor-version":[{"id":11918,"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/pages\/1406\/revisions\/11918"}],"wp:attachment":[{"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/media?parent=1406"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}