{"id":3088,"date":"2026-06-18T10:25:28","date_gmt":"2026-06-18T10:25:28","guid":{"rendered":"https:\/\/aiper.com\/blogs\/?page_id=3088"},"modified":"2026-07-30T09:15:41","modified_gmt":"2026-07-30T09:15:41","slug":"n1-wifi-setup","status":"publish","type":"page","link":"https:\/\/aiper.com\/blogs\/troubleshooting\/n1-wifi-setup\/","title":{"rendered":"Scuba N1 Wi-Fi Setup &amp; App Connection"},"content":{"rendered":"\n<div class=\"aiper-tc-guide\">\n<style>\n    .aiper-tc-guide { --p:#7c3aed; --a:#7030d9; }\n\n    .aiper-tc-guide {\n        max-width: 780px;\n        margin: 0 auto;\n        font-family: 'Inter','Segoe UI',system-ui,-apple-system,sans-serif;\n        color: #2c3e50;\n        line-height: 1.6;\n    }\n    .aiper-tc-guide * { box-sizing: border-box; margin: 0; padding: 0; }\n\n    .aiper-tc-guide .container {\n        display: flex; flex-direction: column; gap: 28px;\n        padding: 40px 20px 60px; background: #f3f6f9; border-radius: 24px;\n    }\n\n    \/* \u2500\u2500 Hero card \u2500\u2500 *\/\n    .aiper-tc-guide .hero-card {\n        background: #fff; border-radius: 24px; padding: 36px 38px 32px;\n        box-shadow: 0 12px 32px rgba(0,0,0,.08), 0 4px 12px rgba(0,0,0,.05);\n        border: 1px solid #edf2f7; position: relative; overflow: hidden;\n    }\n    .aiper-tc-guide .hero-card::before {\n        content: ''; position: absolute; top: 0; left: 0; right: 0; height: 5px;\n        background: linear-gradient(90deg, var(--p) 0%, var(--a) 60%, color-mix(in srgb, var(--a) 80%, white) 100%);\n        border-radius: 24px 24px 0 0;\n    }\n    .aiper-tc-guide .eyebrow {\n        display: inline-block; font-size: .75rem; font-weight: 600;\n        letter-spacing: .06em; text-transform: uppercase;\n        color: var(--a); background: color-mix(in srgb, var(--p) 8%, white);\n        padding: 5px 12px; border-radius: 20px; margin-bottom: 16px;\n    }\n    .aiper-tc-guide .hero-card .hero-title {\n        font-size: 1.75rem; font-weight: 700; color: #1a2e3c;\n        letter-spacing: -.02em; line-height: 1.25; margin-bottom: 6px;\n        margin-top: 0;\n    }\n    .aiper-tc-guide .hero-card .subtitle {\n        font-size: .95rem; color: #5a6c7d; font-weight: 500;\n    }\n\n    \/* \u2500\u2500 Answer card \u2500\u2500 *\/\n    .aiper-tc-guide .answer-card {\n        background: #f9fcfe; border-radius: 14px; padding: 28px 32px;\n        border: 1px solid color-mix(in srgb, var(--p) 30%, white);\n        box-shadow: 0 1px 3px rgba(0,0,0,.04);\n    }\n    .aiper-tc-guide .label-badge {\n        display: inline-flex; align-items: center; gap: 6px;\n        font-size: .7rem; font-weight: 700; letter-spacing: .07em;\n        text-transform: uppercase; color: #fff; background: var(--p);\n        padding: 6px 14px; border-radius: 20px; margin-bottom: 18px;\n    }\n    .aiper-tc-guide .label-badge .dot {\n        width: 7px; height: 7px; border-radius: 50%;\n        background: color-mix(in srgb, var(--a) 60%, white);\n        animation: atc-pulse 2s ease-in-out infinite;\n    }\n    @keyframes atc-pulse { 0%,100%{opacity:1;} 50%{opacity:.35;} }\n    .aiper-tc-guide .answer-card p {\n        font-size: 1.04rem; color: #1e3b4a; line-height: 1.7; font-weight: 450;\n    }\n\n    \/* \u2500\u2500 Section cards \u2500\u2500 *\/\n    .aiper-tc-guide .section-card {\n        background: #fff; border-radius: 14px; padding: 30px 34px;\n        box-shadow: 0 4px 16px rgba(0,0,0,.06), 0 2px 6px rgba(0,0,0,.04);\n        border: 1px solid #edf2f7; transition: box-shadow .2s;\n    }\n    .aiper-tc-guide .section-card:hover {\n        box-shadow: 0 12px 32px rgba(0,0,0,.08), 0 4px 12px rgba(0,0,0,.05);\n    }\n    .aiper-tc-guide .section-card h2 {\n        font-size: 1.22rem; font-weight: 700; color: #1a2e3c;\n        letter-spacing: -.015em; margin-bottom: 16px;\n    }\n    .aiper-tc-guide .section-card p {\n        font-size: .94rem; color: #3d4f5c; line-height: 1.7;\n    }\n    .aiper-tc-guide .section-card a {\n        color: var(--a); text-decoration: none; font-weight: 500;\n    }\n    .aiper-tc-guide .section-card a:hover { text-decoration: underline; }\n    .aiper-tc-guide .section-card strong { color: #1e3b4a; }\n\n    \/* \u2500\u2500 Section icons (CSS-only, no inline styles) \u2500\u2500 *\/\n    .aiper-tc-guide .section-icon {\n        display: inline-flex; align-items: center; justify-content: center;\n        width: 44px; height: 44px; border-radius: 12px; margin-bottom: 14px;\n        flex-shrink: 0; position: relative;\n    }\n    .aiper-tc-guide .icon-info { background: color-mix(in srgb, var(--p) 12%, white); }\n    .aiper-tc-guide .icon-info::after {\n        content: ''; display: block; width: 18px; height: 18px;\n        border: 2px solid var(--p); border-radius: 50%;\n    }\n    .aiper-tc-guide .icon-info::before {\n        content: ''; position: absolute; width: 5px; height: 5px;\n        background: var(--p); border-radius: 50%; z-index: 1;\n    }\n    .aiper-tc-guide .icon-steps { background: #fef6ed; }\n    .aiper-tc-guide .icon-steps::after {\n        content: ''; display: block; width: 8px; height: 16px;\n        border-left: 2.5px solid #e67e3a; border-bottom: 2.5px solid #e67e3a;\n        transform: rotate(-45deg); margin-top: -2px;\n    }\n    .aiper-tc-guide .icon-warn { background: #fdecea; }\n    .aiper-tc-guide .icon-warn::after {\n        content: '!'; font-weight: 700; font-size: 1.4rem; color: #c94a4a; line-height: 1;\n    }\n    .aiper-tc-guide .icon-fix { background: #f0fdf4; }\n    .aiper-tc-guide .icon-fix::after {\n        content: '\u2713'; font-weight: 700; font-size: 1.1rem; color: #2d8f6e; line-height: 1;\n    }\n\n    \/* \u2500\u2500 Inline highlight & part-number \u2500\u2500 *\/\n    .aiper-tc-guide .hl {\n        font-weight: 700; color: var(--p);\n        background: color-mix(in srgb, var(--p) 8%, white);\n        padding: 2px 8px; border-radius: 4px; white-space: nowrap;\n    }\n\n    @media (max-width: 600px) {\n        .aiper-tc-guide .hero-card,\n        .aiper-tc-guide .section-card,\n        .aiper-tc-guide .answer-card { padding: 22px 18px; }\n        .aiper-tc-guide .hero-card .hero-title { font-size: 1.4rem; }\n        .aiper-tc-guide .container { padding: 24px 14px 40px; gap: 20px; }\n    }\n\n    \/* Back-nav *\/\n    .aiper-tc-guide .tc-back-nav {\n        padding: 14px 0 4px;\n        border-top: 1px solid #edf2f7;\n        margin-top: 4px;\n    }\n    .aiper-tc-guide .tc-back-nav a {\n        font-size: .85rem; font-weight: 600; color: var(--a);\n        text-decoration: none;\n    }\n    .aiper-tc-guide .tc-back-nav a:hover { text-decoration: underline; }\n<\/style>\n<div class=\"container\">\n    <div class=\"hero-card\">\n        <span class=\"eyebrow\">Aiper Scuba N1<\/span>\n        <p class=\"subtitle\">The Scuba N1 requires 2.4 GHz Wi-Fi.<\/p>\n    <\/div>\n    <div class=\"answer-card\">\n        <span class=\"label-badge\"><span class=\"dot\"><\/span> Direct answer<\/span>\n        <p>The Scuba N1 requires <strong>2.4 GHz Wi-Fi<\/strong>. QR code says &#8216;incorrect&#8217; or won&#8217;t scan? Try <strong>4 alternative methods<\/strong>: manual serial entry, Bluetooth discovery, Wi-Fi reset + rescan, or AP Mode direct hotspot (see all below). Robot must connect within 5 minutes of power-on.<\/p>\n    <\/div>\n        <div class=\"section-card\">\n            <div class=\"section-icon icon-info\"><\/div>\n            <h2>2.4 GHz Only<\/h2>\n            <p>The N1 does not support 5 GHz. Check your router settings and connect to the 2.4 GHz band. Many dual-band routers show one combined SSID \u2014 if yours does, split the bands into separate SSIDs and use the 2.4 GHz one for the N1.<\/p>\n        <\/div>\n        <div class=\"section-card\">\n            <div class=\"section-icon icon-steps\"><\/div>\n            <h2>Pairing via QR Code<\/h2>\n            <p>In the Aiper app, when adding the N1, select the QR code option and scan the code printed on the bottom of the robot. This skips manual password entry and resolves most &#8220;incorrect password&#8221; errors immediately.<\/p>\n        <\/div>\n        <div class=\"section-card\">\n            <div class=\"section-icon icon-steps\"><\/div>\n            <h2>QR Code Failed? 3 Alternative Pairing Methods<\/h2>\n            <p>If scanning the QR code on the bottom of the N1 fails with &#8216;incorrect&#8217; or does nothing: <strong>Method 1 \u2014 Manual entry.<\/strong> In the Aiper app, tap &#8216;Add Device&#8217; and look for the &#8216;Enter Manually&#8217; or &#8216;Add Without QR&#8217; link (usually below the scan frame). Type the 12-character serial number printed on the QR code label (format: XSDXXXXXXXXX). <strong>Method 2 \u2014 Bluetooth discovery.<\/strong> Ensure Bluetooth is enabled on your phone. Turn the N1 off and back on \u2014 the robot broadcasts Bluetooth for <strong>5 minutes<\/strong> after each power-on. In the app, choose &#8216;Search Nearby Devices&#8217; instead of scan. The N1 should appear in the device list. <strong>Method 3 \u2014 Reset and rescan.<\/strong> Perform a Wi-Fi reset (hold power 10 seconds until LED flashes, then release). After the reset, the N1 re-enters pairing mode. Clean the QR code label with a dry cloth \u2014 dirt or water spots can cause scan failures. Hold your phone 6&ndash;8 inches from the label and ensure the entire code is in the frame. If all three methods fail, the QR code label may be physically damaged (peeling, scratched). Contact Aiper support with a photo of the label and your serial number \u2014 they can register the device to your account from the backend.<\/p>\n        <\/div>\n        <div class=\"section-card\">\n            <div class=\"section-icon icon-warn\"><\/div>\n            <h2>Wi-Fi Reset Procedure<\/h2>\n            <p>Hold the power button for 10 seconds until the LED flashes. Release \u2014 the robot clears all saved Wi-Fi credentials and restarts in pairing mode. Re-add the device in the Aiper app from scratch.<\/p>\n        <\/div>\n        <div class=\"section-card\">\n            <div class=\"section-icon icon-fix\"><\/div>\n            <h2>App Shows N1 as Offline After Retrieval<\/h2>\n            <p>After cleaning, retrieve the robot and bring it within Wi-Fi range. If the app still shows it offline: force-quit the app and reopen. Power cycle the N1. The app display typically syncs within 30&ndash;60 seconds. If offline status persists, check that the robot&rsquo;s Wi-Fi is connected (solid green LED) before investigating further.<\/p>\n        <\/div>\n\n        <div class=\"section-card\">\n            <div class=\"section-icon icon-info\"><\/div>\n            <h2>QR Code Label Damaged or Unreadable<\/h2>\n            <p>If the QR code label on the bottom of the N1 is scratched, peeling, faded, or physically damaged: (1) Take a clear photo of the label with your phone \u2014 sometimes the camera can capture detail your eyes miss. (2) If the serial number is still legible on the label (format: XSDXXXXXXXXX), use <strong>Method 1 \u2014 Manual Entry<\/strong> described above. You only need the serial number, not the QR code itself. (3) If the entire label is unreadable, the serial number is also printed on the retail box and in your purchase confirmation email. (4) If you cannot find the serial number anywhere, contact Aiper support with your purchase receipt \u2014 they can locate your device in the system and register it to your account from the backend.<\/p>\n        <\/div>\n        <div class=\"section-card\">\n            <div class=\"section-icon icon-steps\"><\/div>\n            <h2>Method 4 \u2014 AP Mode (Direct Wi-Fi Hotspot Pairing)<\/h2>\n            <p>If QR code scanning, manual entry, and Bluetooth discovery all fail: <strong>AP Mode (Access Point Mode)<\/strong> lets your phone connect directly to the N1&#8217;s built-in Wi-Fi hotspot for initial setup. (1) Power on the N1 and wait 30 seconds. (2) On your phone, go to Settings \u2192 Wi-Fi and look for a network named <strong>&#8220;Aiper-Scuba N1-XXXXX&#8221;<\/strong> or similar (the last 5 characters match your serial number). (3) Connect to this network. The password is usually <strong>12345678<\/strong> or printed on the QR code label. (4) Once connected, open the Aiper app \u2014 it should detect the N1 on the local network. (5) Follow the app prompts to connect the N1 to your home Wi-Fi. The N1&#8217;s AP hotspot is only active for the first <strong>5 minutes<\/strong> after power-on. If you don&#8217;t see the network, power cycle the N1 and check again immediately.<\/p>\n        <\/div>\n\n        <div class=\"section-card\">\n            <div class=\"section-icon icon-info\"><\/div>\n            <h2>QR Code Label Damaged or Unreadable<\/h2>\n            <p>If the QR code label on the bottom of the N1 is scratched, peeling, faded, or physically damaged: (1) Take a clear photo of the label with your phone \u2014 sometimes the camera can capture detail your eyes miss. (2) If the serial number is still legible on the label (format: XSDXXXXXXXXX), use <strong>Method 1 \u2014 Manual Entry<\/strong> described above. You only need the serial number, not the QR code itself. (3) If the entire label is unreadable, the serial number is also printed on the retail box and in your purchase confirmation email. (4) If you cannot find the serial number anywhere, contact Aiper support with your purchase receipt \u2014 they can locate your device in the system and register it to your account from the backend.<\/p>\n        <\/div>\n        <div class=\"section-card\">\n            <div class=\"section-icon icon-steps\"><\/div>\n            <h2>Method 4 \u2014 AP Mode (Direct Wi-Fi Hotspot Pairing)<\/h2>\n            <p>If QR code scanning, manual entry, and Bluetooth discovery all fail: <strong>AP Mode (Access Point Mode)<\/strong> lets your phone connect directly to the N1&#8217;s built-in Wi-Fi hotspot for initial setup. (1) Power on the N1 and wait 30 seconds. (2) On your phone, go to Settings \u2192 Wi-Fi and look for a network named <strong>&#8220;Aiper-Scuba N1-XXXXX&#8221;<\/strong> or similar (the last 5 characters match your serial number). (3) Connect to this network. The password is usually <strong>12345678<\/strong> or printed on the QR code label. (4) Once connected, open the Aiper app \u2014 it should detect the N1 on the local network. (5) Follow the app prompts to connect the N1 to your home Wi-Fi. The N1&#8217;s AP hotspot is only active for the first <strong>5 minutes<\/strong> after power-on. If you don&#8217;t see the network, power cycle the N1 and check again immediately.<\/p>\n        <\/div>\n\n    <div class=\"tc-back-nav\">\n        <a href=\"https:\/\/aiper.com\/blogs\/troubleshooting\/\">&larr; All troubleshooting guides<\/a>\n    <\/div>\n<\/div>\n<\/div>\n","protected":false},"excerpt":{"rendered":"<p>Aiper Scuba N1 The Scuba N1 requires 2.4 GHz Wi-Fi. Direct answer The Scuba N1 requires 2.4 GHz Wi-Fi. QR code says &#8216;incorrect&#8217; or won&#8217;t scan? Try 4 alternative methods: manual serial entry, Bluetooth discovery, Wi-Fi reset + rescan, or AP Mode direct hotspot (see all below). Robot must connect within 5 minutes of power-on&#8230;.<\/p>\n","protected":false},"author":3,"featured_media":0,"parent":2931,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_kad_post_transparent":"","_kad_post_title":"","_kad_post_layout":"","_kad_post_sidebar_id":"","_kad_post_content_style":"","_kad_post_vertical_padding":"","_kad_post_feature":"","_kad_post_feature_position":"","_kad_post_header":false,"_kad_post_footer":false,"_kad_post_classname":"","footnotes":""},"class_list":["post-3088","page","type-page","status-publish","hentry"],"lang":"en","translations":{"en":3088,"fr":3775,"es":3776,"de":5407},"_links":{"self":[{"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/pages\/3088","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/comments?post=3088"}],"version-history":[{"count":9,"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/pages\/3088\/revisions"}],"predecessor-version":[{"id":8008,"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/pages\/3088\/revisions\/8008"}],"up":[{"embeddable":true,"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/pages\/2931"}],"wp:attachment":[{"href":"https:\/\/aiper.com\/blogs\/wp-json\/wp\/v2\/media?parent=3088"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}