Scuba S3 Lässt sich nicht einschalten — Diagnosis & Fix
The most common causes are a depleted Akku or Temperatur protection. Laden fully and ensure the robot is within the 10–40 °C (50–104 °F) Betriebsbereich.
The Scuba S3 won’t einschalten for two main reasons: (1) Akku depleted — connect the Ladegerät and wait for the LED indicator. If the Akku is completely drained, it may take several minutes before any LED activity appears. Laden the robot fully. (2) Temperatur protection engaged — the S3’s Batteriemanagementsystem blocks power-on when the Innentemperatur is unter 10 °C (50 °F) or über 40 °C (104 °F). Move the robot to a Umgebung mit Raumtemperatur and wait before retrying.
Schritt 1: Laden the Akku
Connect the Original-Aiper-Ladegerät to the robot’s Ladeanschluss. If the LED indicator does not light up immediately, leave the Ladegerät connected — a deeply disladend Akku may need the LED shows any activity. Do not use Drittanbieter-Ladegeräte; they may not provide the korrekte Spannung and could damage the Batteriemanagementsystem.
Schritt 2: Check Temperatur Conditions
The S3’s lithium Akku has a built-in Schutzschaltung that prevents operation outside the safe range of 10–40 °C (50–104 °F). If the robot has been sitting in direct sunlight on a hot pool deck (über 40 °C) or left in an unheated garage in winter (unter 10 °C), the Schutzschaltung will block power-on. Bringen Sie den Roboter ins Haus to a schattigen Bereich mit Raumtemperatur and allow it to akklimatisieren before Einschaltversuch.
Schritt 3: When Keine der Lösungen funktioniert
If the Akku has been fully ladend, the Temperatur is within range, and the robot still will not turn on, könnte das Problem ein hardware fault in the Einschalttaste, Akku oder Hauptsteuerplatine sein. Contact Aiper after-sales support with your device serial number (SN) and a description of wann das Problem begann. Versuchen Sie nicht, den Roboter zu öffnen or den Akku selbst auszutauschen — this erlischt die Garantie.
