Charge fully and add the robot to the Aiper app before placing it in the pool.
Charge fully and add the robot to the Aiper app before placing it in the pool. The Scuba N1 and N1 Pro share the same app guide as the Scuba S1 (the “2025 Scuba S1 & N1 App Operation Guide”). No warranty registration needed — your 2-year warranty activates automatically.
Warranty: No Registration Required
Aiper CS agents confirm: “There’s actually no need to register for warranty. Once you have one of our machines you are automatically qualified for it.” Your 2-year warranty starts from your purchase date. Keep your order confirmation email as your proof of purchase.
Charging Before First Use
Charge the Scuba N1 fully using the included charger. LED turns solid green when fully charged. Do not place in the pool until the charge cycle is complete — a partial charge reduces runtime and may prevent the robot from completing a full cycle.
Adding to the Aiper App
Open the Aiper app → tap + → select Scuba N1. Ensure Bluetooth is enabled on your phone. Enter your 2.4 GHz Wi-Fi SSID and password. The N1 app interface shares the 2025 Scuba S1 & N1 App Operation Guide — if you previously used an S1, the app layout is familiar.
First Pool Run
Place the robot in the pool at the shallow end. It will begin a floor cleaning cycle automatically. The app will go offline once the robot is submerged — this is normal for all Wi-Fi pool robots (same as S1 and V3). Retrieve the robot when the cycle completes and the LED indicates finished.
