The Scuba SE supports 2.4 GHz Wi-Fi only.
The Scuba SE supports 2.4 GHz Wi-Fi only. “Incorrect password” almost always means you are on a 5 GHz network. Wi-Fi reset: hold power button 10 seconds.
2.4 GHz Requirement
The SE cannot connect to 5 GHz networks. Check your router and enable the 2.4 GHz band. If your router uses one combined SSID for both bands, split them and connect the SE to the 2.4 GHz SSID.
Step-by-Step Pairing
1. Fully charge the SE. 2. Power on — Wi-Fi indicator flashes. 3. Open Aiper app → tap + → select Scuba SE. 4. Enable Bluetooth on your phone. 5. Enter 2.4 GHz Wi-Fi password. 6. Keep phone within 1–2 m of the SE during pairing. 7. LED turns solid green = connected.
Wi-Fi Reset
Hold the power button for 10 seconds until the LED flashes three times. Release — all Wi-Fi credentials are cleared. Re-add the SE to the Aiper app from scratch.
App Shows SE as Offline
After cleaning, retrieve the SE and bring it within Wi-Fi range. Force-quit the Aiper app and reopen if the display lags. Power cycle the SE if it still shows offline after app restart.
