Weekly Pool Maintenance Checklist

For residential pool owners organizing a weekly equipment and cleaning review during the swimming season. Water testing, debris removal and safety checks may be needed more often; this is not a once-a-week safety schedule.

During the swimming season

Download PDF (LETTER) Download PDF (A4)

Before you start

Gather current water-test supplies, a maintenance log, cleaning tools and the manuals for your pump, filter and treatment system.
Before opening baskets or filters, isolate power and automatic controls and follow the manual to relieve pressure. Keep swimmers out during cleaning or chemical treatment.

Water and safety

Check barriers, gates and water visibility (Essential)
Task details
Restrict access if a safety defect is found.
Test sanitizer and pH and record results (Essential)
Task details
Follow the test kit and treatment-system instructions. CDC advises checking sanitizer and pH at least twice daily, and more often during heavy use; this weekly review does not replace those checks.
Check other water balance parameters as appropriate (If Applicable)
If these measurements are required for your surface, water source or treatment system.
Not applicable: Check other water balance parameters as appropriate
Task details
Use your treatment system guidance for alkalinity, stabilizer, calcium and salt testing frequency.
Adjust treatment based on measured results (If Applicable)
If measured results indicate treatment is needed.
Not applicable: Adjust treatment based on measured results
Task details
Follow labels, circulation requirements and re-entry directions; never mix chemicals.

Cleaning and equipment

Empty and inspect accessible baskets (If Applicable)
If accessible baskets are fitted.
Not applicable: Empty and inspect accessible baskets
Task details
Isolate power and automatic controls, and relieve pressure as the manual directs before opening. Remove debris and replace cracked baskets with compatible parts.
Brush and clean the floor as needed (Essential)
Task details
Use surface-compatible tools and a suitable cleaner.
Check water level, circulation and leaks (Essential)
Task details
Investigate unusual noise, air bubbles or visible leaks.
Check filter pressure against the clean baseline (If Applicable)
If a filter gauge or model-specific service indicator is fitted.
Not applicable: Check filter pressure against the clean baseline
Task details
Clean or backwash only when indicated by the filter manual; isolate and depressurize first.

Record and prepare

Record readings, treatment and equipment observations (Essential)
Task details
Keep records offline; adjust the next visit to conditions.
Restock test supplies if needed (Optional)
Task details
Check expiration dates and store chemicals safely.
Retest water after any treatment (If Applicable)
If water was treated.
Not applicable: Retest water after any treatment
Task details
Follow label circulation and waiting instructions; verify results before allowing swimming.

Updated 2026-11-05

Was this helpful?

Inaccurate / tool error Too complex / hard to follow Didn't solve my problem

Thank you for your feedback!