Published: May 16, 2026 | Views: 147,000 | Source: Aiper Official
About This Video
In this episode of the Aiper Pro Club, we break down the science of pool water balance into simple, actionable steps. Crystal-clear water is easier than you think.
Video Script & Key Takeaways
1. Step 1: Test Your Water Correctly
Use a quality test kit or strips — not guesswork. Test pH, free chlorine, total alkalinity, calcium hardness, and CYA (stabilizer) for a complete picture.
2. Step 2: Adjust Total Alkalinity First
Alkalinity is the buffer that stabilizes pH. Aim for 80-120 ppm. Add baking soda to raise it or muriatic acid to lower it — always in small increments.
3. Step 3: Dial In Your pH
pH between 7.2-7.6 is the sweet spot for swimmer comfort and chlorine effectiveness. Low pH corrodes equipment; high pH makes chlorine sluggish.
4. Step 4: Shock and Stabilize
After balancing, shock your pool to burn off contaminants and add stabilizer (CYA) to protect chlorine from UV degradation. 30-50 ppm CYA is ideal for most pools.
Want more tips? Subscribe to the Aiper Official YouTube channel for weekly how-to videos on pool care, lawn maintenance, and smart outdoor living.
Related Videos
