Effective Tips On How To Clean Your Pool Cover

A sparkling swimming pool is a backyard oasis, offering the homeowners an enjoyable and relaxing escape from the routine chaos. However, to sustain this experience, regular maintenance of the swimming pool is vital.

Maintaining a swimming pool isn’t just limited to cleaning the water. It’s also about cleaning what’s covering it. Swimming pool enclosures play a key role in preserving the quality and longevity of the water. Swimming pool covers come in different types. You can have a manual pull cover that would require a bit of effort to cover the whole pool area, but it’s very affordable. However, for people who are willing to spend a bit more to eliminate the effort, there are automatic pool covers.

Whether you have a manual or an automatic pool cover, cleaning and maintaining it are equally important. In this article, we will provide a comprehensive guide on how to clean pool covers. Following this simple cleaning routine at least once a year will ensure a longer lifespan of your pool cover, whether it’s manual or automatic.

 

Tools And Materials Needed For Pool Cover Cleaning

Before learning about how to clean pool cover and carrying out the cleaning job, it’s vital that you gather all the necessary tools and equipment that would assist you in effectively cleaning your pool covers. With the right tools and materials, you will be able to perform the cleaning job effectively, and the results will be worth the effort.

Here is the list of tools and materials you need to have before starting to clean the pool cover:

  1. Soft-bristled brush or pool cleaner brush
  2. Garden hose or pressure washer (if safe for the cover material)
  3. Bucket or large container for mixing cleaning solutions
  4. Sponge or scrubbing pad
  5. Towels or rags for drying
  6. Pool cover pump (if applicable, for removing excess water)
  7. Extension pole (for reaching distant areas of the cover)
  8. Safety goggles and gloves (to protect your eyes and hands)
  9. Pool cover cleaning detergent

 

Step-By-Step Guide: How To Clean Your Pool Cover

With the materials in hand, let’s dive into the step-by-step guide for cleaning your pool cover effectively:

  • Step 1: Remove debris from the pool cover using a telescopic pool brush, a nylon pool brush, or a soft-bristled broom to gently sweep away leaves, twigs and bulky debris. Be careful not to apply too much pressure or you could damage the cover.
  • Step 2: If there’s excessive water on top of your solid pool cover, you can use a cover pump that drains off the water. Not only will this make the cover easier to remove but it will also prevent unnecessary strain on the covers
  • Step 3: Once you’ve removed the debris and excess water, it’s time to deep clean the cover. First, remove the cover from the pool and lay it flat in a reasonably clean area, such as a paved driveway or grassy area. Avoid placing your cover on a rough surface, as twigs or sharp stones might puncture it. If you’re cleaning a solar cover, place the cover somewhere shady or out of direct sunlight to avoid overheating and damaging the cover. To clean the cover, apply the cleaning solution to the cover and use a soft brush or sponge to gently scrub the surface. Avoid walking on the cover, as this can damage it. Use your pool brush or the telescopic pool brush to extend your reach, which will make this process go more smoothly.
  • Step 4: After scrubbing, rinse the cover thoroughly to remove any cleaning residues or remaining dirt. Start from one end and work your way across the cover, ensuring all the cleaning solution is washed away. Make sure you clean both sides of the cover, not just the top.
  • Step 5: If you plan to put the cover back on the pool, you’re all done and can skip these final steps. However, if you plan to store the cover, you’ll need to allow it to dry completely before folding it up and placing it in storage.
  • Step 6: Finally, when the cover is completely dry, fold or roll it neatly for storage. Follow the manufacturer’s instructions for the specific type of coverage that you have, as proper storage techniques may vary. Always store the cover in a clean and dry area away from direct sunlight or extreme temperatures.

 

That’s all, by following these simple steps to clean your pool cover, you can ensure it stays ready to protect your pool year after year. Remember to carefully inspect and clean your pool cover regularly to maintain its effectiveness and prolong its lifespan.

Close-up of a dirty pool cover, with debris and water spots

 

Troubleshooting Common Issues About Pool Cover Maintenance

Pool covers are subject to having common issues like minor or major damages as well as mold and mildew. It’s a good idea to carefully inspect it for thin areas, rips, or other damage. If you notice any holes or tears in the damaged area that are smaller than a dollar bill, you can use the pool cover patch kits to repair the damage promptly.

Addressing these issues early on will help prevent further damage and extend the life of your cover. If the cover has excessive damage, you may want to consider ordering a new cover and disposing of the old one.

Rolling up a wet cover traps moisture, which can lead to mold and mildew. If possible, lay the cover out in direct sunlight to expedite the drying process, unless you have a solar cover. Remember that a solar cover needs to be kept in a shady area whenever it’s off the pool to avoid damage. If rodents, gnawing insects, or dusty conditions are a problem, you may want to store the cover inside a hard plastic bin for extra protection.

 

Maintenance Tips For Pool Covers

Proper maintenance of pool covers can surely increase their lifespan. Different pool covers require different cleaning schedules. It’s best to follow the manufacturer’s instructions about routine maintenance of the pool cover.

It’s best to pack and store pool covers in your storage during the off-season. It will prevent unnecessary exposure to extreme weather during months when you will not be using the pool for long. In addition to cleaning the pool cover, it’s also important to regularly clean the pool itself. Ensure the chemical balance of the pool water.

Quality pool vacuum will assist you well. A premium pool vacuum cleaner like the Aiper Scuba S1 Pro for horizontal waterline cleaning. It’s designed for the toughest cleaning jobs, where the dual filtration system works in tandem with the quad brushless motor to dedicate more power to scrubbing and suction. It can pick up and store small debris in the massive 5-liter debris basket.

 

Conclusion

We hope you have a thorough idea of how to clean pool cover. By following all the mentioned pool maintenance tips and the step-by-step guide to cleaning the pool cover, you’re going to ensure an effortless and effective cleaning job. Following the maintenance tips for pool covers will help you sustain its effectiveness and longer lifespan.

Share:

Leave a Reply

On Key

Related Posts